Picture
To clean your compressor, just spray the compressor coil with the AIRCONcare™ chemical solution. Keep the spray nozzle close to the coil. Make sure you cover the coil completely with the chemical. Just wait 10 mins and flush with water-jet or the long nozzle sprayer if you don't have a water jet or long hose. Oh please switch off your mains just in case. I would use a long hose to just hose down the coil. If you see that the rotor blades are dirty, just remove the cover and spray the chemical directly onto each blade just like you would your home standing fan blade. I find that its alot easier to remove the dirt from the blades with their chemical. (By the way, our product works even on the tower fan!) Just wipe the blades especially the edges off any dirt with a damp cloth. This will help get back the aerodynamics of the blades which means they will have the blowing power again. This last step is only if you have direct access to your compressor. If you live in a HDB or an apartment and the compressor is sitting out on a ledge, then we would not recommend the wiping step as it might be dangerous. Also you should time the washing of your compressor to a rainy day to avoid your neighbor complaining of the dripping waste water. 

 
 


Comments

Romana
03/04/2011 20:20

l just used the product, and l found it didn't quite spin the fan around, but l eventually got it clean, l probably didn't have the best wrist action to spray, but it smells lovely, and it is very much cleaner, after not being touched for 4 years after having many many severe dust storms, l am impressed, thankyou.

Reply



Leave a Reply